| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Trimming Brace Ends http://www-.luthiersforum.com/forum/viewtopic.php?f=10101&t=56906 |
Page 1 of 1 |
| Author: | Terence Kennedy [ Mon Dec 02, 2024 3:08 pm ] |
| Post subject: | Trimming Brace Ends |
I was fitting a back today and couldn’t remember if I posted this before but a little tape on an X-Acto saw is a great way to trim brace ends without damaging the back or top. You can finish the cut with a #11 blade.  IMG_9698 by Terence Kennedy, on Flickr
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|